Buy Low Price From Here Now
The APSAM universal articulating arm mount supports virtually any display up to 55" with hole patterns up to 27.7" horizontally and 19" vertically. The APSAM also features a full 27" of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5" profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17" wall plate which is specifically designed for installation to standard 16" studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.
Readmore
Technical Details
- Collapses to less than 4" from the wall- Extends to a full 26" from the wall
- High quality powder coat finish
- Built-in bubble level in wall plate
- Dual safety screws to lock TV Position
See more technical details
By Jerrie S. Walker (Lompoc, CA USA)
We ordered this product for our 37" flat screen. The price was considerably less than many of the other articulating mounts that I researched. I was very surprised by the quality of the Cheetah mount when it arrived. It is a seriously heavy weight product.
The only thing I would complain about is the weak instructions that came along with the device. Grant it, we have a very unique situation; we had a tough time figuring out where to locate the mount. Seems to me they could have given some advice on how to measure to locate the mount. It took a lot of thinking to figuring and installing and re-installing to get the TV installed.
We are extremely happy with the finished product and would highly recommend it to anyone needing this type of mount. It is definitely worth the money.
By Curtis Bender (California,USA)
Read all of the reviews after looking at every option available on the market.
I needed this for a 32" flat screen with alot of viewing possibilities.
This is as heavy duty as you can get. It actually outweighed my T.V..
When this thing extends all of the way out as stated, the T.V. stays in the middle of the bubble of the level. Go ahead and spend hours of time surfing for the best deals, and sturdiest brackets. Nothing else comes close both in value and strength. The installation I used was through a stucko wall, and like others have said, I went to the hardware store and got the same size bolts as the biggest ones they give you, but longer, to go all of the way into the studs a ways.Do yourself a favor and use the black plastic spacers they give you and put them between the T.V. and the bracket so you can adjust the tilt without taking the T.V. off the bracket.Easy to install if you are handy at all. In a nutshell the best product I have ever bought.
By Garry Stanley (VA, USA)
I had my initial doubts when ordering this product. However, the price of TV mounts at chain electronic stores swayed me to go into the direction of the Cheetah mount. I mounted a 40" Samsung on the mount which weighs around 40lbs. The cheetah mount itself is very well built and weighs in at around 28lbs. I have no doubt this mount would easily support 80-100lb's.
The Cheetah mount comes with all of the options needed to install the product quickly. The product comes with 4 screws to mount into wooden studs and optional hardware for concrete installation as well. There are also 3 sets of (4 screws) included which are used to attach the TV screen to the swiveling mount included. So, you assured that one of the screw sets will be the proper size to secure your TV to the mount.
The mounting plate fits perfectly to the standard 16" stud distance that most homes have. Again with this standard installation distance of 16 inches I have no doubt this stand would support 80-100lbs easily. If the distance between studs is further then the standard 16" distance there is hardware included for this type of installation. However, I'm not sure I would trust the mount to support a TV of much weight using this option.
The built in level works really well. Before tightening down the anchoring bolts completely to the wall make sure the mount sits level. Extend the swivel portion of the mount inward and outward and double check to see if the mount is level throughout the entire range of motion. If the mount becomes slightly "out of level" upon extension or retraction adjust the base plate slightly and use a pencil to mark this leveled location on the wall. Once the TV is in the proper location to remain level throughout its length of travel tighten your anchoring bolts down completely. If you skip this process the TV may slightly dip or angle slightly when extended.
There are cutouts also on the back of the mount. The advantage of this is that your TV can still sit closely to the wall but these holes provide a little extra gap to run wires through while also providing some distance between the wall and cords. So, there shouldn't be any issues with the cables coming into contact with the wall or mount.
The angling portion of the mount is very easy to use as well. Make sure when installing the brackets to the TV that your tightening arms are positioned towards the outer edges of the TV. Otherwise you will not be able to get to these tightening arms once the TV is installed. If the brackets are installed properly you can easily reach them to adjust the angle.
I paid $39.69 + shipping ($18) for this mount. For that price point at the local chain stores I would've come home empty handed. Local shops were charging $99.99 + taxes for a basic wall mount with no swiveling/extending option. So, for $40 less I received a product that was of equal or better quality and had the options of swiveling and extending.
By D. Shaw (Upstate NY)
I just hung a new 42" plasma TV on this thing and there's no doubt in my mind that it is secure. This mount is diesel! Attach this thing to the studs in your wall, and you're set. The mount comes with more hardware than you'll know what to do with. My only complaint was I had to run to the store to get shorter screws to attach the arms to the TV. But, 15 minutes later I was back in business. It's possible that the mount actually weighs more than my TV, and it's definitely a 2 person job to set this up. I'm very happy with it, and Amazon had the best price by a long-shot.
By R.T. (UTAH)
Just installed this for my 42" Panasonic plasma. The mount is heavy duty and seems to hold great. Even extended all the way out there is no noticeable sag.
The only issue during installation was I had to get longer screws to mount to the back of the television. They needed to be 35mm instead of 30mm. The 30mm screws provided would grab but only a few threads. $1.98 at Lowes and I was in business.
No complaints so far!
Images Product
Buy Cheetah Mounts APSAMB Tilt and Swivel Articulating Arm for Plasma LCD TV 32"-55" Now
0 ความคิดเห็น:
แสดงความคิดเห็น