วันพุธที่ 9 มิถุนายน พ.ศ. 2553

Mount World LED01 Samsung Ultra Slim Wall Mount WMN1000B Alternative for Samsung LED 40" 42" 46" 55"

Buy Cheap Mount World LED01 Samsung Ultra Slim Wall Mount WMN1000B Alternative for Samsung LED 40" 42" 46" 55"


Buy Low Price From Here Now

This wall mount bracket is for LED TVs that need to be mounted as close to the wall as possible and hang like a picture frame, comparable to the name brand solution WMN1000B. With less than 15mm (14.5mm to be exact, yes MILLIMETERS which equates to just 0.57 inches) this is one of the slimmest wall mounting solutions on the market today! Featuring high quality mounting hardware and a "kick-stand" style lever to hold the TV away from the wall while connecting and disconnecting cables, this mount has a unique design that's both visually appealing as well as functional. Compare with Samsung $249 WMN1000B, you can go with this factory direct generic solution with just as good build quality.
Readmore

Technical Details

- Supports all Samsung LED model with screen size 40" 46" 55" (Not Make by Samsung)
- Support VESA 400x400
- Low profile wall mount 14.5mm/0.5 inch close to wall and hang like a picture frame.
- Support tv up to 100 lbs
- Standard mounting hardware included.
See more technical details
Customer Buzz
 "Samsung TV wall mount" 2010-06-01
By Joseph Ferncez (Lake Wales, FL USA)
A must have for anyone with a Samsung LED TV. End result is that of a picture frame on the wall. No gap between wall and TV.

Customer Buzz
 "Amazing Price" 2010-05-21
By Jason Lee (Reno, USA)
This product performed as advertised. It was easy to install and my Samsung 46 LED is as close to the wall. My TV looks great on the wall for a few weeks now and haven't had any problems.



I brought for $39 and I would recommend this Ultra slim mount





Customer Buzz
 "Little Disappointing" 2010-05-19
By H. E. Havemann
I bought the product because i couldn't beleive the price. Once i received it i mounted all the parts on the wall where they should be. I then proceeded to screw the plastic brackets and cable into the back of my new LCD as instructed. Whilst tightening the screws to my dissapontment one of the plastic brackets cracked and came appart. Just a word of advice don't tighten the plactic bracket too tight.

Customer Buzz
 "Perfect" 2010-05-03
By Kritikos
Don't buy the Samsung version of this wall mount. The Samsung is way overpriced for what it is (it's priced to match the effect of what it does and not the cost of making this product). This wall mount works perfectly fine and is identical to the Samsung one.

Customer Buzz
 "Fairly accurate knock off of the Samsung Slim Wall Mount" 2010-05-02
By John D. Curry
I tried this mount out with my 55" Samsung LED LCD TV. I really wanted to use this slim mount as it was 2 to 3 time cheaper than the Samsung. The aluminum blocks that screw on the wall are of very good quality and simple design that mimics the Samsung version. The supplied wall plaster screw system, two large plastic inserts that fit into the plaster, for my taste are not strong enough to trust hanging your TV on. From my experience these types of plaster inserts do not grip the back of the plaster wall sufficiently to be considered sturdy. The Samsung kit supplies four Hilti plaster board bolt systems which are much more strong. Still I would at least place one of the two aluminum blocks with large wall screws (supplied) directly into an available 2x4" beam behind the plaster board.



The 1.5" bolts that fit into the wire part of the mount (two plastic disks joined by a 12" wire) were used with two 1/2" plastic spacers. This meant that 0.5" of bolt would screw into the TV. I noted that the bolt would not be able to fully screw into the TV as there was 0.3" of space for the bolt. You could use the shorter bolts but I wanted to use the 0.5" plastic spacers so the TV would have a slight downward tilt to it. I really did not want to tighten these bolts into a 0.9" thick Samsung TV and find out what could happen if they deformed anything as they tightened. I guess I could have added some larger washers to get the spacing right (none were supplied).



Finally the two plastic parts that fit onto the top of the TV had me worried. The wire part consists of two plastic disks strung together by a plastic coated wire. The black plastic appears to be regular ABS type plastic, hard and perhaps brittle. The wire is held in side the disks by a wire end crimps about 1/4" wide. This would direct all the weight of the TV on to these two crimps, one on either side of the wire and thus onto the inner side of the plastic disk. This is alot of force to apply continuously to a little area of plastic. For a 40" LED TV, I feel it would be okay with that degree of stress. For the 55" TV I hung on the wall, this potential for a crack had me worried. In the end do you really trust a little piece of Chinese plastic to hold your new TV? My examination of the identical mount from Samsung had me really appreciate the construction of the Samsung and worry about the quality of this knock off wall mount. In the end my 55" is hanging off a Samsung wall mount drilled into one 4x4" wood stud and one Hilti plaster board mount.




Images Product

Buy Mount World LED01 Samsung Ultra Slim Wall Mount WMN1000B Alternative for Samsung LED 40" 42" 46" 55" Now

0 ความคิดเห็น:

แสดงความคิดเห็น