Buy Low Price From Here Now
Model MP860B is one of the strongest mounts on the market today. It has easy to follow instructions with a Durable Powder Coated Finish. The color for this mount is Black VESA 850 compatible Solid Steel Arms Strongest on the Market Unlike the other mounts online this is made from heavy gauge steel on wont warp when fully extended. Will this mount fit my TV? First, check the weight of your TV. It must be less than 200 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes. If the vertical distance is within 23.6 inch, horizontal distance is within 33.5 inch, then this bracket will fit.
Finally, the width of your TV should be 37" or above, otherwise the mount is too wide to hide behind your TV. If you are not sure whether this fits your TV , please contact us, we will check for you.
Readmore
Technical Details
- Fits most 37"-63" flat panel screen LCD LED TV displays (please check VESA and weight)- Max Loading capacity up to 200 lbs.Fit VESA 300X100mm up to 850(H ) x 600mm(W)
- Extends up to 32" from the wall, Collapses about 4" from the wall
- Cable management on arm. Tilt up and down, swivel left and right
- Standard hardware park included;
See more technical details
By Alvin Imken (San Marcos, Texas)
This wall mount is the best & least expensive one I could find. It was very easy to assemble & install on the wall....heavy duty stuff! My nephew & I had our new Sony 60" flat screen TV installed onto it in less than 30 minutes from the time we uncrated the wall mount. I love it because it is so sturdy, swivels up and down, left & right & extends from the wall far enough to be flush with the front of our entertainment center--looks darn good!
By Glenn A. Carter (Henderson, NV)
This mount is very well constructed. It comes with a nice template to mark the wall for the mount holes. The operation was a bit stiff for adjusting tilt, etc. out of the box, however that is easily corrected by loosening the hex screws at the joints. Overall I am pleased with this purchase and the price was very reasonable compared to buying it at a store.
By Tennis Bum (Dallas)
The cantilever swing out articulating arm is well made and easily supports a 50" Plasma screen TV, for which used the arm. The pricing was excellent and significantly less than I was able to find elsewhere. My only complaint about the unit is the very poor assembly instructions which becomes compounded by the plethora of screws included with the units with no instructions on to their specific use. After spending time reviewing the unit and the poor instructions, I had to resort to trial and error on the proper screws to use for my specific installation. Other than the assembly challenges the unit functions well with a wide range of motion, fully extends out to its stated length, and does tuck in tight when in the resting position. I would heartily recommend the unit, but caution those with little patience to prepare for the almost certain frustration on the installation.
By J. Ortego
At first I was a little worried about using this mount on my new 65" plasma that weighed 142lbs, but installation was a breeze and it's looked perfect ever since. The mount is really sturdy and durable. I'm even thinking about getting another one for my other tv. It's a great mount for the price and you can't beat it anywhere, trust me I looked around. I would buy again in a heartbeat. Thanks.
By Tim Wright (Everywhere)
I bought this mount due to very limiting space in my bedroom to mount a tv. I needed one with a lot of movement, and the ability to pull far from the wall, this way it could be mounted in a corner. This did the job perfectly. The mount had plenty of holes for the mounting bolts, which helped out with the studs on that section of my wall not being standard distance apart.
PROS:
*Very Sturdy
*Plenty of movement, and ease of movement
*Backplate has a variety of mounting holes (ease of mounting)
CONS:
*Terrible instructions
*Bit of work to install
The instructions were absolutely terrible for this thing. They were not needed for me, but I can see where it would be a problem for many other people. Its a bit unwieldy securing it, so if you are weak, don't install it alone. The tools you will need are: Drill and bits (pilot holes into the studs), nut driver or rachet, level, stud sensor, and screwdrivers.
All in all, an excellent product. Took me about 30 minutes from receiving the box to mounting it on the wall, but expect it to take upwards of an hour and a half. It holds up my 46" with ease, and allows me to swivel the TV easily.
Images Product
Buy VideoSecu Heavy Duty Dual Arm 4-32 inch Long Extension MP860B Cantilever Swingout Articulating Wall Mount for 37"-63" Plasma LCD LFD LED TV 1Y4 Now
0 ความคิดเห็น:
แสดงความคิดเห็น